BASF GLYTHERMIN DC PG25: specs and approvals

Updated 22 October 2026 · Independent, sourced reference

Summary

BASF GLYTHERMIN DC PG25 coolant data, from BASF's own source. GLYTHERMIN DC PG25 is a premix (ready to use) propylene glycol-based coolant listed by BASF. The manufacturer's page we checked does not list OEM spec codes.

Independent and not affiliated. Coolant.com is not affiliated with, sponsored by or endorsed by any coolant or vehicle maker or retailer listed here, and we earn nothing from these links. Brand and spec names are used only to identify products. Every field comes from the manufacturer's own page or datasheet, checked 22 October 2026. "Not published" means we could not find it in that source. We record no prices.

Specifications

BrandBASF
MakerBASF
ProductGLYTHERMIN DC PG25
Part numbers (as published)not published
Sizes (as published)not published
Chemistrynot published
Base glycolPropylene glycol
Colournot published
Premix or concentratePremix (ready to use)
OEM / industry specs listednot published
ASTM standards listedASTM D8039
Service life claimnot published
Freeze point (as published)not published
Free-of claimsnot published
Datasheetnot published
Sourcemanufacturer page
Last checked22 October 2026

Specs and approvals listed by the manufacturer

  • Meets ASTM D8039 per BASF (industry test standard)

Manufacturer wording: BASF: qualified as an NVIDIA DSX Ready coolant (secondary loop, single-phase cold plate); >99.5% PG purity; hybrid inhibitors; stated to exceed ASTM D8039.

"Meets X per manufacturer" is our shorthand for any of the manufacturer's own phrases: meets, meets or exceeds, approved, or recommended for applications requiring. It is the manufacturer's claim, not an approval by Coolant.com or by the vehicle maker. Codes are copied as published. Some sources list codes for compatibility rather than formal approval. The wording above shows which.

Compatibility notes

  • Sold premixed: pour as supplied. Do not add water unless the label says to.
  • Data-center fluid: use only where the CDU and hardware vendor approve it. See the liquid cooling hub and the DC coolant comparator.

Note: Data-center direct-to-chip fluid. Base: Propylene glycol (PG25, ready to use). See /suppliers/ and the DSX Ready guide for context.

Always check your owner's manual first. Use the coolant spec printed in your owner's manual or service information. A listing here is the manufacturer's own claim (meets, exceeds, approved or recommended, worded as they put it). It is not our approval and not a fitment guarantee for your vehicle. If in doubt, ask your dealer or a qualified mechanic.

Where to buy

We did not find a retailer link on the manufacturer's page that we could check. Try the manufacturer's own site: BASF product page.

Compare this coolant side by side

Open the comparison →

See all BASF coolants, coolants by brand or coolant by car make.

Browse the full coolant directory, or use Find my car coolant to match the spec in your owner's manual.

Sources

  1. BASF product page (status on 22 Oct 2026: 200)