Summary
Shell DLC Fluid S3 coolant data, from Shell's own source. Shell DLC Fluid S3 is a premix (ready to use) propylene glycol-based coolant listed by Shell. The manufacturer's page we checked does not list OEM spec codes.
Specifications
| Brand | Shell |
|---|---|
| Maker | Shell |
| Product | Shell DLC Fluid S3 |
| Part numbers (as published) | not published |
| Sizes (as published) | not published |
| Chemistry | not published |
| Base glycol | Propylene glycol |
| Colour | not published |
| Premix or concentrate | Premix (ready to use) |
| OEM / industry specs listed | not published |
| ASTM standards listed | not published |
| Service life claim | not published |
| Freeze point (as published) | -10 °C |
| Free-of claims | 2-EHA-free, borate-free, silicate-free |
| Datasheet | not published |
| Source | manufacturer page |
| Last checked | 22 October 2026 |
Specs and approvals listed by the manufacturer
No OEM approval or spec codes are published on the source we checked. That does not mean the product fails any spec. It means the manufacturer did not list one there. Check the product label or ask the manufacturer.
Compatibility notes
- Sold premixed: pour as supplied. Do not add water unless the label says to.
- Data-center fluid: use only where the CDU and hardware vendor approve it. See the liquid cooling hub and the DC coolant comparator.
Note: Data-center direct-to-chip fluid. Base: PG25. See /suppliers/ and the DSX Ready guide for context.
Where to buy
We did not find a retailer link on the manufacturer's page that we could check. Try the manufacturer's own site: Shell product page.
Compare this coolant side by side
Open the comparison →More from Shell
See all Shell coolants, coolants by brand or coolant by car make.
Browse the full coolant directory, or use Find my car coolant to match the spec in your owner's manual.
Sources
- Shell product page (status on 22 Oct 2026: 200)